Common vertical bearing pedestals have many advantages

Large SNL bearing pedestals adopt split planning: The main advantage of split planning bearing pedestals is convenient installation; Preassembled shafts can be installed. After connecting the bearing pedestal and the support pedestal, simply place the bearing pedestal top cover in place and tighten the connecting bolts to complete the installation.

Currently, the split bearing pedestals on the market are mainly suitable for self-aligning ball bearings, spherical roller bearings, and CARB ring roller bearings. This bearing seat is suitable for 02.03.22.33.33.31.32.39.40 and 41ISO series bearings. They can usually be fitted with multiple seals. Split bearing housings have multiple plans and deformations, and do not require the use of custom bearing housings, making bearing equipment cost-effective.

SNL large bearing pedestals mainly include SNL30. SNL31 and SNL32 series. SNL large bearing pedestals adopt vertical planning. Series 30.31 and 32 SNL bearing housings are also referred to as "large SNL bearing housings.".

Special attention should be paid to the following points during the use of bearing blocks: the use of cooling systems for bearing blocks. When used correctly, the cooling water for the bearing seat not only extends the service life of the bearing seat, but also improves consumption efficiency. The data of the bearing pedestal is generally made of special bearing pedestal steel through various processes.

No matter how good the bearing pedestal steel is, there are limitations to its use, such as temperature. When the bearing block is in use, assuming that the mold temperature is too high, it is easy to cause cracks on the surface of the mold core early. Some bearing blocks have large areas of cracks before exceeding 2000 mold times. As a result, the mold core of the bearing seat has changed color due to the high temperature of the bearing seat during consumption.

Measure above 400 degrees. When this temperature encounters the chilling state of the release agent again, it is easy to crack, and the consumed product is also easy to deform, strain, and adhere to the mold. Using heavy duty bearing block cooling water can greatly reduce the use of mold release agents, preventing operators from using mold release agents to reduce the temperature of the bearing block.

Its advantages are to extend the service life of the bearing seat, save the die casting cycle, improve production and quality, reduce the occurrence of mold sticking, strain, and aluminum sticking, and reduce the use of release agents. It can also reduce the loss of the ejector pin and core caused by overheating of the bearing pedestal temperature.

During the process of starting consumption of bearing blocks, it is necessary to stop preheating the bearing blocks to avoid the occurrence of cracks caused by sudden contact with hot metal liquid in cold bearing blocks. For more disorderly bearing blocks, use a blowtorch, liquefied gas, or a mold warmer if conditions are good. Compared to simple bearing blocks, slow pressure injection can be used for preheating.

These bearing pedestals allow the bearings to achieve the longest service life while reducing protection requirements. This will help end users further reduce protection costs. In terms of other enhancements, the planning of the SNL bearing housing makes it simple and neutral during the installation process. Another advantage is the ability to choose between oil smooth or grease smooth bearings in SNL bearing housings. Because it provides a series of seals suitable for smooth oil and harsh environments, it can achieve trouble-free operation.