What are the advantages of heavy duty bearing pedestals?

1. The outer diameter of the bearing and the inner diameter of the bearing seat with the self-aligning function are spherical, and there is a self-aligning function between them, which can compensate for axis misalignment and deformation of the installation bottom surface caused by installation errors.

Due to the same internal structure of the outer ball bearing as the 6100 and 6300 series deep groove ball bearings, the FS ball bearing with seat not only bears radial loads, but also bears certain axial loads. There are also low noise bearings.

3. External spherical ball bearings with long service life are generally used in harsh working environments, such as soil, dust, humidity, and high temperatures. The grease in the bearings can deteriorate in a short period of time. Therefore, it is necessary to regrease the outer spherical ball bearing with seat, replacing the deteriorated grease with fresh grease. FS cast iron outer spherical ball bearings are equipped with grease nipples that can be re lubricated, ensuring their performance and long service life in any environment.

4. According to the different ambient temperatures, normal temperature, low temperature, and high temperature lubricating greases can be selected. There are oil grooves on the outer ring of the bearing, which can better ensure that the grease can be smoothly injected into the bearing from the nozzle.

5. The outer spherical ball bearing has good sealing performance and sealing performance, with a composite seal of heat resistant and oil resistant rubber sealing ring and steel plate dust cover. The dust cover, which rotates together with the outer diameter of the bearing inner ring, can prevent external foreign matters from entering the inside of the bearing and can resist external pressure to protect the bearing. This combined seal consisting of a sealing ring and a dust cover can prevent dirt, dust, and moisture from entering the inside of the bearing, while preventing the leakage of lubricating grease inside the bearing. In this way, good performance can be maintained in harsh working environments.

The sturdy bearing seat is of an integral seat structure, which can prevent deformation of the bearing during assembly and can be used in any situation. The bearing seat can be cast with materials such as gray iron, ductile iron, and cast steel.

The above is the relevant information shared by the manufacturers of heavy-duty bearing blocks. I hope it can be helpful to you. If you have any unclear questions, you can consult online or by phone. We will wholeheartedly serve you!