What precautions should be taken when using partial bearing seats?

People's lives are increasingly inseparable from bearing blocks, but how much do we know about bearing blocks? "Because one bearing can choose different floor bearing seats, while another floor bearing seat can choose different floor bearing seats at the same time, there are many types of floor bearings made of crepe silk. The scientific definition of a floor bearing seat is to install it on the gas steel body of a steam turbine, or to support the floor bearing seat.".

The following precautions should be taken when using partial bearing pedestals:

1. Keep the bearings and the surrounding environment clean.

Even invisible dust entering the bearings can increase bearing wear, vibration, and noise.

2. Be careful when using and installing

Do not use strong stamping, do not use a hammer to directly hit the bearing, and do not use rolling elements to transmit pressure.

3. Use suitable and accurate installation tools

Try using special tools to avoid things like cloth and short fibers.

4. Prevent corrosion of bearing ground

Before using the bearing, directly pick up the bearing with your hand. You should fully wash the sweat off your hands, and then apply high-quality mineral oil. Pay special attention to rust prevention in the rainy season and summer.

The support seat is used to support the supporting ground and fix the outer ring of the supporting ground. Only the inner ring is allowed to rotate, and the outer ring is not moved. It always keeps consistent with the transmission direction (such as the movement direction of the motor) and maintains balance. The concept of the support seat is to combine the support seat and the supporting ground of the box for ease of use, which is conducive to better coordination, more convenient use, and reducing the cost of using the manufacturer. As for the shape, it is generally a box, The support seat can be installed in the box. According to the requirements of the support seat and the bearing seat, the classification of the support seat is not completely the same. When using it, it is necessary to carefully check and select according to the design.